⎝⎛188比分直播⎞⎠

您好,欢迎来到深圳市威悍防静电科技有限公司官方网站! Favorite Weihan | Feedback | Hello, Welcome to the official website of Shenzhen Weihan Antistatic Technology Co., Ltd.!

common problem

FAQ

Using an ion fan to clean the substrate sounds simple and obvious, but how do you use an ion fan to clean the substrate ..
The fabric of anti-static clothing is generally a synthetic fiber fabric embedded with conductive wire, although the fiber itself is difficult to be cleaned ..
The industry stipulates that the safety voltage is 36V and the safety current is 10mA. The degree of harm to the human body from electric shock depends mainly on passing people

contact details

FAQ

Shenzhen Weihan Antistatic Technology Co., Ltd.

Contact: Miss Yang

Phone: 86-0755-29981716

Mobile: 13580960057

Fax: 86-0755-29981710

Address: No.53, Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City

人体综合测试仪 Your current location : ⎝⎛188比分直播⎞⎠ - Products - Static Tester Series - Human Integrated Tester Human Integrated Tester

Product name: Human Body Comprehensive Tester

Product model: WH-7802

product details

Features
1. The WH-7802 human body comprehensive tester has outstanding features to quickly test ESD equipment. Three independent devices (left shoe, right shoe, and wrist strap) complete ESD detection at one time.
2. There are three states and three status displays respectively. LO (below the set value), PASS (within the set value range), and HI (above the high set value) have alarm functions.
3. If other power adapters are used, the under-power indicator below 9V will be on, which will affect the test accuracy. The power adapter is AC or DC12V, and it cannot be greater than 15V!
4. There are three test modes: A. only the left and right shoes are tested; B is only the electrostatic bracelet; C is full hand / foot test.

Technical Parameters

Wrist strap: 750KΩ-10.5MΩ test range Shoe cover: 750KΩ-35MΩ test range
Resistance value (± 20%) Test output Resistance value (± 20%) Test output
≤740KΩ Red (FAIL LO resistance is low) ≤740KΩ Red (FAIL LO resistance is low)
750KΩ Green (PASS is normal) 750KΩ Green (PASS is normal)
10. 5MΩ Green (PASS is normal) 100MΩ Green (PASS is normal)
≥11.5MΩ Red (FAIL HI high resistance) ≥110MΩ Red (FAIL HI)
  • Related Products
  • Repair and maintenance
  • Installation and operation
  • after-sale warranty
  • about transportation
  • regarding payment

Features
1. The WH-7802 human body comprehensive tester has outstanding features to quickly test ESD equipment. Three independent devices (left shoe, right shoe, and wrist strap) complete ESD detection at one time.
2. There are three states and three status displays respectively. LO (below the set value), PASS (within the set value range) and HI (above the high set value) have alarm functions.
3. If other power adapters are used, the under-power indicator below 9V will be on, which will affect the test accuracy. The power adapter is AC or DC12V, and it cannot be greater than 15V!
4. There are three test modes: A. only the left and right shoes are tested; B is only the electrostatic bracelet; C is full hand / foot test.

Technical Parameters

Wrist strap: 750KΩ-10.5MΩ test range Shoe cover: 750KΩ-35MΩ test range
Resistance value (± 20%) Test output Resistance value (± 20%) Test output
≤740KΩ Red (FAIL LO resistance is low) ≤740KΩ Red (FAIL LO resistance is low)
750KΩ Green (PASS is normal) 750KΩ Green (PASS is normal)
10. 5MΩ Green (PASS is normal) 100MΩ Green (PASS is normal)
≥11.5MΩ Red (FAIL HI high resistance) ≥110MΩ Red (FAIL HI)
Precautions:
A. While wearing the wrist strap, insert the end of the (wire) plug into the socket on the front of the tester. B. Set the transfer switch to the "WRIST CORD" position.
C. Press the test button to start the tester. The tester can be started in 2-3 seconds.
Note: Never touch metal parts by mistake during the test.
D. The green “PASS” LED is on, indicating that the wrist and the ground wire device are functioning normally.
E. If the "FALT LO" or "FALL HI" LED lights up and an audible alarm is issued, the wearer of the wristband must immediately check whether the wristband device is normal.
Use operation
1. Before use, please plug in the power adapter to charge and start the machine. Set the switch to ON, and the static DC is 12V / mA.
2. During the ESD test, as long as your feet step on the opposite metal pedals, wear a wrist strap and insert or insert it into the wrist terminal, and then gently connect your fingers to the metal test button to know whether the ESD equipment is qualified. Note: Do not wear gloves or use your nails to press the metal test button. See Figure 3 for correct use
Install :
1. Push the bottom of the wiring bracket on the pedal out of the top.
2. Three sets of M8 * 30mm fix the bracket to the pedal.
3. Plug the wiring into any of the opposite wires at the bottom of the instrument.
4. Fix the instrument in the opposite position with screw M3 * 15mm.
5. Lift the bracket up and down locking knobs to lock the height of the bracket.

Product warranty commitment
Our company strictly abides by the tenet of product quality first, reputation first, customer first, and implements the following commitments on all products sold by our factory:
1. Warranty period The warranty period of the products sold by the company is one year. The quality problems caused by the product's own mechanical parts, materials and workmanship within one year from the date of sale will be replaced or repaired by the factory free of charge.
2. Service after the warranty period All products sold by the company after the warranty period are still responsible for repairing the product without labor costs to protect the interests of customers.
3. Our company provides free maintenance, testing and other services for ion fans once a quarter; if some equipment is found to have quality problems during the maintenance process, in order to ensure the normal operation of the user, our company will provide new products to replace the work area, waiting for This product will be delivered to the user after being calibrated; if it cannot be calibrated, our factory will replace the new product for free.
4. Once a technical failure occurs, the factory will solve the problem for the user's phone as soon as possible. If the phone cannot solve the problem, it will overtake the fault site within 12 hours within 300 axioms of the service point; within two hours from 300 kilometers Take the fastest way, provide new equipment within 48 hours and replace the faulty equipment with the production line.

Mode of transportation:
1. Logistics (SF, Debang, Shentong, Suer)
2. Within the Pearl River Delta, deliver more to your door
Arrival time:
1. Within the Pearl River Delta, arrive within 24 hours
2. Provinces, 2-3 working days

payment method:
1. Standard products, customers in the Pearl River Delta, cash on delivery; customers in other provinces, delivery on delivery. Special circumstances can be handled specially.
2. Custom-made products with special models, 50% deposit in advance, and cash on delivery for the rest.
Payment account:
For corporate accounts (customers who issue VAT invoices):
Company Name: Shenzhen Weihan Antistatic Technology Co., Ltd.
Tax ID: 4403 0031 9431 443
Account number: 000176947742
Bank: Gongle Sub-branch, Shenzhen Agricultural Commercial Bank

Phone: 18487903773 Email: szweihan@qq.com
Address: No. 53 Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City, Guangdong ICP No. 15010061 [ Baidu Statistics ]
Copyright © 2003-2014 cnciu.com, All Rights Reserved BMAP GMAP

  • QQ交流
  • QQ交流
  • QQ交流
Wechat QR code
炸金花 炸金花 炸金花 炸金花