⎝⎛188比分直播⎞⎠

您好,欢迎来到深圳市威悍防静电科技有限公司官方网站! Favorite Weihan | Feedback | Hello, Welcome to the official website of Shenzhen Weihan Antistatic Technology Co., Ltd.!

common problem

FAQ

Using an ion fan to clean the substrate sounds simple and obvious, but how do you use an ion fan to clean the substrate ..
The fabric of anti-static clothing is generally a synthetic fiber fabric embedded with conductive wire, although the fiber itself is difficult to be cleaned ..
The industry stipulates that the safety voltage is 36V and the safety current is 10mA. The degree of harm to the human body from electric shock depends mainly on passing people

contact details

FAQ

Shenzhen Weihan Antistatic Technology Co., Ltd.

Contact: Miss Yang

Phone: 86-0755-29981716

Mobile: 13580960057

Fax: 86-0755-29981710

Address: No.53, Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City

离子风机 Your current location : ⎝⎛188比分直播⎞⎠ - Products - Static Eliminator Series - Ion FanIon Fan

Product Name: Desktop DC Ion Fan

Product model: WH-5500A

Product features: fast and concentrated neutralization of static electricity; small, exquisite, easy to operate;

Rated voltage: 110v / 60hzor220V / 50HZ

Power range: 30W

product details

WH-5500A desktop DC ion fan: The circuit adopts international advanced closed-loop control series. The circuit can automatically control the amount of positive and negative ions according to the voltage on the sensor (iron mesh cover) at the fan outlet, thereby ensuring the ion fan. Has a good ion balance and a wide range of temperature and humidity. (Body length can be customized according to requirements)

WH-5500A desktop DC ion fan is used to increase the amount of positive and negative ions in the air and neutralize the static electricity on the surface of the object to be eliminated, thereby preventing and eliminating the harm of static electricity. The static elimination ion series products adopt humanized design, which makes it easy to operate and easy to maintain.

  • Related Products
  • Repair and maintenance
  • Installation and operation
  • after-sale warranty
  • about transportation
  • regarding payment
WH-5500A desktop DC ion fan: The circuit adopts international advanced closed-loop control series. The circuit can automatically control the amount of positive and negative ions according to the voltage on the sensor (iron mesh cover) at the fan outlet, thereby ensuring the ion fan. Has a good ion balance and a wide range of temperature and humidity. (Body length can be customized according to requirements)

WH-5500A desktop DC ion fan is used to increase the amount of positive and negative ions in the air and neutralize the static electricity on the surface of the object to be eliminated, thereby preventing and eliminating the harm of static electricity. The static elimination ion series products adopt humanized design, which makes it easy to operate and easy to maintain.

maintenance

Ion blower is aimed at constant maintenance and low repair

Maintenance items: cleaning of the emitter, correction of ion balance, correction of static elimination time. Clean the emitter at least once a week, and periodically adjust the ion balance and static elimination time to ensure the normal operation of the ion fan.

1.Cleaning of the transmitter

To clean the launch point of the transmitter, rotate the handle of the cleaning head clockwise to release it after stopping, then turn it repeatedly until it is clean, at least once a week.

2.Air inlet and outlet cleaning

The air inlet net and ionization outlet net should be kept clean to prevent obstructing the airflow. They can be cleaned with a soft brush or compressed air.

3. Ion balance test

Measure with a plate load monitor or ion balance (residual voltage) with an ion tester

4. Static elimination time test

Use static analyzer or load monitoring board to measure static elimination time.

5. Calibration

Ion blower, the output design of the ion amount is balanced and fixed. It may be affected by factors such as voltage fluctuations, ambient air dryness and humidity, etc., and a shift in ion balance (residual voltage) will be formed.

Offset standard: 0V ± 5V

Note

1. The test data is based on the test results with the ME268A static tester;
2. The test data will vary depending on the ambient air temperature and humidity during the test.

installation

1. The ion fan is lightweight and has a long service life. The "U" -shaped frame is fixed on the side of the fuselage with screws. When in use, it can be placed in place with M8 threaded Torx screws.

2. The ion fan requires 220, 50HZ (or 110V, 60Hz) as the operating voltage. The fan should be single-phase connected to the socket, and the socket must be safely wired.

The connection of the power cord is as follows:

Brown — phase line blue — center line green / yellow — ground


operating

Turn the governor switch clockwise until the indicator light is on to turn on the fan, generate ion airflow, increase the fan's wind speed, you can rotate the governor switch clockwise, the indicator light off to the off position indicates that the fan is off.

The ion fan generates an ionized wind beam to cover the target area. The neutralization time of the wind beam is determined by many factors. The two most important reasons are the distance of the ion fan and the wind speed. Air ions are constantly neutralizing each other, and cations and anions are attracted to each other by static electricity, forming the transfer of these charges and recombining. High wind speeds can neutralize them further away. The higher the wind speed, the faster the neutralization of static electricity.

When using an ion fan for electronic assembly, the ionized airflow should cover the working area as much as possible, so that the positive and negative charges on the surface of the object can be well neutralized, so that it can maintain a neutral state.

Product warranty commitment
Our company strictly abides by the tenet of product quality first, reputation first, customer first, and implements the following commitments on all products sold by our factory:
1. Warranty period The warranty period of the products sold by the company is one year. The quality problems caused by the product's own mechanical parts, materials and workmanship within one year from the date of sale will be replaced or repaired by the factory free of charge.
2. Service after the warranty period All products sold by the company after the warranty period are still responsible for repairing the product without labor costs to protect the interests of customers.
3. Our company provides free maintenance, testing and other services for ion fans once a quarter; if some equipment is found to have quality problems during the maintenance process, in order to ensure the normal operation of the user, our company will provide new products to replace the work area, waiting for This product will be delivered to the user after being calibrated; if it cannot be calibrated, our factory will replace the new product for free.
4. Once a technical failure occurs, the factory will solve the problem for the user's phone as soon as possible. If the phone cannot solve the problem, it will overtake the fault site within 12 hours within 300 axioms of the service point; within two hours from 300 kilometers Take the fastest way, provide new equipment within 48 hours and replace the faulty equipment with the production line.

Mode of transportation:
1. Logistics (SF, Debang, Shentong, Suer)
2. Within the Pearl River Delta, deliver more to your door
Arrival time:
1. Within the Pearl River Delta, arrive within 24 hours
2. Provinces, 2-3 working days

payment method:
1. Standard products, customers in the Pearl River Delta, cash on delivery; customers in other provinces, delivery on delivery. Special circumstances can be handled specially.
2. Custom-made products with special models, 50% deposit in advance, and cash on delivery for the rest.
Payment account:
For corporate accounts (customers who issue VAT invoices):
Company Name: Shenzhen Weihan Antistatic Technology Co., Ltd.
Tax ID: 4403 0031 9431 443
Account number: 000176947742
Bank: Gongle Sub-branch, Shenzhen Agricultural Commercial Bank

Phone: 18487903773 Email: szweihan@qq.com
Address: No. 53 Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City, Guangdong ICP No. 15010061 [ Baidu Statistics ]
Copyright © 2003-2014 cnciu.com, All Rights Reserved BMAP GMAP

  • QQ交流
  • QQ交流
  • QQ交流
Wechat QR code
炸金花 炸金花 炸金花 炸金花