⎝⎛188比分直播⎞⎠

您好,欢迎来到深圳市威悍防静电科技有限公司官方网站! Favorite Weihan | Feedback | Hello, Welcome to the official website of Shenzhen Weihan Antistatic Technology Co., Ltd.!

common problem

FAQ

Using an ion fan to clean the substrate sounds simple and obvious, but how do you use an ion fan to clean the substrate ..
The fabric of anti-static clothing is generally a synthetic fiber fabric embedded with conductive wire, although the fiber itself is difficult to be cleaned ..
The industry stipulates that the safety voltage is 36V and the safety current is 10mA. The degree of harm to the human body from electric shock depends mainly on passing people

contact details

FAQ

Shenzhen Weihan Antistatic Technology Co., Ltd.

Contact: Miss Yang

Phone: 86-0755-29981716

Mobile: 13580960057

Fax: 86-0755-29981710

Address: No.53, Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City

风淋室 Your current location : ⎝⎛188比分直播⎞⎠ - Products - Purification equipment series - Air shower roomAir shower room

Product name: Cargo shower room

Product model: cargo shower room

product details

The cargo shower room is the necessary passage for the goods to enter the clean room, and it can reduce the pollution problems caused by the goods entering and leaving the clean room. The two cargo shower rooms of the cargo shower room are electronically interlocked with the cargo door, which can double as the air lock room to prevent unpurified air from entering the clean room. The automatic voice system prompts when the shower is blowing. The humanized voice prompt gives a friendly feeling and achieves an effective purification effect. The clean air stream filtered by the high-efficiency filter is sprayed onto the surface of the object from all directions by a rotatable nozzle. Quickly remove dust particles. The air with dust particles is filtered by the primary and high-efficiency filters and recirculated to the wind shower area.
product manual
1.Two-speed fan 2.Effective filter 3.Stainless steel nozzle (with guard net) 4.High efficiency filter without partition 5.Tempered glass window
6.Emergency stop switch (3 in total) 7.Indicator 8.Infrared sensor 9.Control panel (with glass cover)
10. Anchor bolt (M12) 11. Operating regulations for imported door closers
1. Wipe the items to be delivered with 0.5% peroxyacetic acid or 5% iodophor.
2. Open the outside door of the transfer window, quickly place the items to be transferred, disinfect the transfer window with 0.5% peroxyacetic acid spray, and close the outside door of the transfer window.
3. Turn on the ultraviolet lamp in the transfer window, and the ultraviolet light should be irradiated for not less than 15 minutes.

4. Inform the experimenters or workers in the barrier system to open the door inside the transfer window and take out the items.

Technical Parameters
model 2300-2 2300-3
Overall dimensions (mm) W2300xL2000xH2050 W2300xL3000xH2050
Air shower area size (mm) W1500xLl860xHl980 W1500xL2860xHl980
Wind speed at nozzle (m / s) 18-22 18-22
Number of nozzles twenty four 36
Shower time (s) S Factory setting is 10s, 10-99s (adjustable) Factory setting is 10s, 10-99s (adjustable)
Box main material 1.2mm cold-rolled steel plate with static plastic sprayed surface 1.2mm cold-rolled steel plate with static plastic sprayed surface
Door material stainless steel stainless steel
HEPA filter size 610x610x120x4 610x610x120x6
Filtration efficiency 99.99at0.31μm 99.99at0.31μm
Fan power (w) 750x4 750x6
Fluorescent lamp power 20x2 20x3
voltage 380V50Hz 380V50Hz
  • Related Products
  • Troubleshooting
  • maintenance
  • after-sale warranty
  • about transportation
  • regarding payment
The cargo shower room is the necessary passage for the goods to enter the clean room, and it can reduce the pollution problems caused by the goods entering and leaving the clean room. The two cargo shower rooms of the cargo shower room are electronically interlocked with the cargo door, which can double as the air lock room to prevent unpurified air from entering the clean room. The high-tech intelligent voice cargo shower room has a voice prompt system. The automatic voice system prompts when the shower is blowing. The humanized voice prompt gives a friendly feeling and achieves an effective purification effect. The clean air stream filtered by the high-efficiency filter is sprayed onto the surface of the object from all directions by a rotatable nozzle. Quickly remove dust particles. The air with dust particles is filtered by the primary and high-efficiency filters and recirculated to the wind shower area.
product manual
1.Two-speed fan 2.Effective filter 3.Stainless steel nozzle (with guard net) 4.High efficiency filter without partition 5.Tempered glass window
6.Emergency stop switch (3 in total) 7.Indicator 8.Infrared sensor 9.Control panel (with glass cover)
10. Anchor bolt (M12) 11. Operating regulations for imported door closers
1. Wipe the items to be delivered with 0.5% peroxyacetic acid or 5% iodophor.
2. Open the outside door of the transfer window, quickly place the items to be transferred, disinfect the transfer window with 0.5% peroxyacetic acid spray, and close the outside door of the transfer window.
3. Turn on the ultraviolet lamp in the transfer window, and the ultraviolet light should be irradiated for not less than 15 minutes.

4. Inform the experimenters or workers in the barrier system to open the door inside the transfer window and take out the items.

Technical Parameters
model 2300-2 2300-3
Overall dimensions (mm) W2300xL2000xH2050 W2300xL3000xH2050
Air shower area size (mm) W1500xLl860xHl980 W1500xL2860xHl980
Wind speed at nozzle (m / s) 18-22 18-22
Number of nozzles twenty four 36
Shower time (s) S Factory setting is 10s, 10-99s (adjustable) Factory setting is 10s, 10-99s (adjustable)
Box main material 1.2mm cold-rolled steel plate with static plastic sprayed surface 1.2mm cold-rolled steel plate with static plastic sprayed surface
Door material stainless steel stainless steel
HEPA filter size 610x610x120x4 610x610x120x6
Filtration efficiency 99.99at0.31μm 99.99at0.31μm
Fan power (w) 750x4 750x6
Fluorescent lamp power 20x2 20x3
voltage 380V50Hz 380V50Hz
switch. There are usually four places in the air shower room to cut off the power:
1. The power switch of the outdoor shower box; 2. The control panel of the indoor shower box; 4. On the outer boxes on both sides of the shower room (the power switch here can prevent the power from being cut off in an emergency and effectively improve the work Personnel safety). When the power indicator is off, do not prevent rechecking the power supply of the above four air shower rooms. Second, when the air shower fan is not working. When the air shower room is not working, check whether the emergency switch of the outdoor shower box is cut off for the first time. If it is determined that it is cut off, gently press it with your hand and turn it loose to the right. 3. The fan of the air shower room is reversed or the wind speed of the air shower room is very small. Please be sure to check whether the 380V three-phase four-wire line is reversely connected. Generally, a professional electrician will connect the line when the air shower room manufacturer installs it. If the line source of the air shower room is connected, the lighter will cause the air shower room fan to not work or reverse the wind speed of the air shower room. The heavy one will burn the circuit board of the entire air shower room; it is recommended to use the air shower room. If you want to replace the wiring, if you need to move it due to production needs, please consult the air shower manufacturer. 4. The air shower room is not blown. In addition to the above three points, it is also necessary to check whether the emergency stop button inside the box of the air shower room is pressed. If the emergency stop button is colored, the air shower room will not blow shower. Press the emergency stop button again to work normally. V. When the air shower room can't automatically sense the blow shower, please check the light sensor system in the lower right corner of the box of the air shower room to see if the light sensor device is installed correctly. Drench. Sixth, when the air shower room is used for a period of time when the wind speed is very low, please check whether the initial and high-efficiency filters of the air shower room have accumulated excessive dust. If so, replace the filter. (The initial effect filter in the air shower room is usually replaced once in 1-6 months, and the high efficiency filter in the air shower room is usually replaced once in 6-12 months.)
1. Regularly use the instrument to determine the various technical indicators of the equipment. If it does not meet the technical parameter requirements, it should be dealt with in a timely manner.
2. According to the actual use, periodically remove the filter material from the primary air filter for cleaning.
3. When it is found that the wind speed becomes small, you should first check whether the surface of the primary air filter is black. If it is black, it means that the pre-filter has more dust holding capacity and increased resistance, that is, the non-woven fabric in the primary air filter should be removed. Clean or replace the cloth.
4. When the non-woven fabric is replaced or cleaned, the wind speed still cannot be increased, it means that the high-efficiency air filter has been blocked, causing increased resistance, the high-efficiency air filter should be replaced.
5. When replacing the high-efficiency filter, you must remove the spray ball plate, take out the high-efficiency filter, and replace the new high-efficiency air filter according to the original model of the high-efficiency filter. During installation, confirm the arrow mark on the high-efficiency filter, and the arrow should point in the direction of the air flow. And make sure the seal is good to prevent leakage.
6. After the high-efficiency filter is replaced, it is necessary to confirm that there is no leakage in the frame, and use a dust particle counter to detect it. After the technical indicators are reached, normal work can be performed.
7, regular maintenance of electrical circuits, if there is a fault, you can refer to the electrical schematic for maintenance.
8. Regularly enclose the door to align the electronic lock with its keyhole to prevent the lock pin from getting stuck.
9. The operating temperature of this equipment must not exceed 50 ° C, and the use of open flames is strictly prohibited.

Product warranty commitment
Our company strictly abides by the tenet of product quality first, reputation first, customer first, and implements the following commitments on all products sold by our factory:
1. Warranty period The warranty period of the products sold by the company is one year. The quality problems caused by the product's own mechanical parts, materials and workmanship within one year from the date of sale will be replaced or repaired by the factory free of charge.
2. Service after the warranty period All products sold by the company after the warranty period are still responsible for repairing the product without labor costs to protect the interests of customers.
3. Our company provides free maintenance, testing and other services for ion fans once a quarter; if some equipment is found to have quality problems during the maintenance process, in order to ensure the normal operation of the user, our company will provide new products to replace the work area, waiting for This product will be delivered to the user after being calibrated; if it cannot be calibrated, our factory will replace the new product for free.
4. Once a technical failure occurs, the factory will solve the problem for the user's phone as soon as possible. If the phone cannot solve the problem, it will overtake the fault site within 12 hours within 300 axioms of the service point; within two hours from 300 kilometers Take the fastest way, provide new equipment within 48 hours and replace the faulty equipment with the production line.

Mode of transportation:
1. Logistics (SF, Debang, Shentong, Suer)
2. Within the Pearl River Delta, deliver more to your door
Arrival time:
1. Within the Pearl River Delta, arrive within 24 hours
2. Provinces, 2-3 working days

payment method:
1. Standard products, customers in the Pearl River Delta, cash on delivery; customers in other provinces, delivery on delivery. Special circumstances can be handled specially.
2. Custom-made products with special models, 50% deposit in advance, and cash on delivery for the rest.
Payment account:
For corporate accounts (customers who issue VAT invoices):
Company Name: Shenzhen Weihan Antistatic Technology Co., Ltd.
Tax ID: 4403 0031 9431 443
Account number: 000176947742
Bank: Gongle Sub-branch, Shenzhen Agricultural Commercial Bank

Phone: 18487903773 Email: szweihan@qq.com
Address: No. 53 Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City, Guangdong ICP No. 15010061 [ Baidu Statistics ]
Copyright © 2003-2014 cnciu.com, All Rights Reserved BMAP GMAP

  • QQ交流
  • QQ交流
  • QQ交流
Wechat QR code
炸金花 炸金花 炸金花 炸金花