⎝⎛188比分直播⎞⎠

您好,欢迎来到深圳市威悍防静电科技有限公司官方网站! Favorite Weihan | Feedback | Hello, Welcome to the official website of Shenzhen Weihan Antistatic Technology Co., Ltd.!

common problem

FAQ

Using an ion fan to clean the substrate sounds simple and obvious, but how do you use an ion fan to clean the substrate ..
The fabric of anti-static clothing is generally a synthetic fiber fabric embedded with conductive wire, although the fiber itself is difficult to be cleaned ..
The industry stipulates that the safety voltage is 36V and the safety current is 10mA. The degree of harm to the human body from electric shock depends mainly on passing people

contact details

FAQ

Shenzhen Weihan Antistatic Technology Co., Ltd.

Contact: Miss Yang

Phone: 86-0755-29981716

Mobile: 13580960057

Fax: 86-0755-29981710

Address: No.53, Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City

表面电阻测试仪 Your current location : ⎝⎛188比分直播⎞⎠ - Products - Static Tester Series - Surface Resistance Tester Surface Resistance Tester

Product Name: Heavy Hammer Static Resistance Tester

Product model: ACL800

product details

CECCASTMUL测试规程设计的,用于测量所有导电型、抗静电型及静电泄放型表面的阻抗或电阻。 ACL-800 precision resistance tester is designed in accordance with EOS / ESD , CECC , ASTM and UL test procedures, and is used to measure the impedance or resistance of all conductive, antistatic and electrostatic discharge surfaces. Easy to use, high quality and high reliability, the meter can also measure the relative humidity and temperature that affect electrical performance.

Technical Parameters
standard test Comply with ESDA / ANSI, -S4.1, S7.1, S11.1 and European CECC-EN1000 / 15 standards
Resistivity range 10e3-10e12 Euro per square
Resistance range 10e3-10e12 Euro
Test related humidity 10% -90% RH
test temperature 0 degrees-37.7 degrees optional
Testable ambient temperature +/- 3 ℃ error
weight 14 lbs
Accuracy 10e3-10e8 Euro / square = +/- 5%; 10e9-10e12 Euro / square = +/- 9%
  • Related Products
  • Use and operation
  • Calibration steps
  • after-sale warranty
  • about transportation
  • regarding payment

CECCASTMUL测试规程设计的,用于测量所有导电型、抗静电型及静电泄放型表面的阻抗或电阻。 ACL-800 precision resistance tester is designed in accordance with EOS / ESD , CECC , ASTM and UL test procedures, and is used to measure the impedance or resistance of all conductive, antistatic and electrostatic discharge surfaces. Easy to use, high quality and high reliability, the meter can also measure the relative humidity and temperature that affect electrical performance.

Technical Parameters
standard test Comply with ESDA / ANSI, -S4.1, S7.1, S11.1 and European CECC-EN1000 / 15 standards
Resistivity range 10e3-10e12 Euro per square
Resistance range 10e3-10e12 Euro
Test related humidity 10% -90% RH
test temperature 0 degrees-37.7 degrees optional
Testable ambient temperature +/- 3 ℃ error
weight 14 lbs
Accuracy 10e3-10e8 Euro / square = +/- 5%; 10e9-10e12 Euro / square = +/- 9%
Surface impedance
1. Parallel Probe Resistivity Method The parallel probe impedance measurement method is a measurement method that complies with the EOS / ESD-S11.11-1993 standard. It is a fast method for measuring the resistance of a uniform material on a plane. This method is also suitable for the measurement of multilayer materials, but the temperature and humidity conditions must be specified in the resistance value report.
A. Place the meter on the surface of the object to be measured.
B. Turn the switch to the required voltage position (10V or 100V)
C. Press the measurement button continuously with a pressure of about 5 pounds. At this time, the LCD screen will display the measured surface impedance, temperature and relative humidity. The entire measurement process is about fifteen seconds.
.Surface impedance unit is ohm / □
.Temperature unit is camera
Relative humidity units are percentages
In each measurement, after pressing the measurement button, the ACL-800 meter will continuously display the trimmed measurement value. Within about forty-five seconds after the button is released, the last measurement value is displayed.
2. Concentric Ring Probe Resistivity method (Concentric Ring Probe is optional) Insert the connection plug into the two 3.5 mm jacks of the table, and connect the banana plug with the concentric ring probe (optional) ) Associated. After placing the probe on the surface of the object to be tested, after pressing the button for about 15 seconds, the correct temperature and relative humidity will be displayed on the LCD screen. The correct surface impedance value is multiplied by 10 on the LCD display. The unit is ohm / □.
Surface resistance measurement This measurement method is in accordance with the EOS / ESD-S4.1 measurement requirements to measure the resistance between two points independent of ground. The measurement results obtained with this measurement method are related to the treatment of the measured object, two 5 pounds The distance between the probes and other factors are related. Therefore, the correct measurement protocol should be selected and the test should be performed under the same measurement conditions each time.
A. Insert the wire plug into the two 3.5 mm jacks of the watch, and connect the banana plug with two 5-pound probes.
B. Place the two probes on the surface of the object to be measured according to the measurement procedure.
C. Select the required voltage value (10V or 100V)
D. Press the switch until the selected voltage value (10 volts or 100 volts) is displayed, continue to press the switch until the measured resistance (unit is ohms), and the relative humidity and temperature are displayed on the LCD screen.
Surface to ground resistance measurement This measurement method is used to measure the surface resistance between one point on the surface of an object and another ground point on the surface. The measurement method complies with the EOS / ESD S S4.1 measurement standard.
A. Insert one end of the two wires into the two 3.5 mm jacks of the watch, and then connect one of them to the crocodile clip and the other to a 5-pound disk probe.
B. Connect the crocodile clip to a known ground point, and place the disc probe on the surface of the object to be measured according to the measurement requirements.
C. Press the measurement button until the resistance (in ohms), relative humidity, and temperature values are displayed on the display. The measurement results conform to EIA.
EOS / ESD, ANSI, IEC-93, CECC, ASTM measurement standards. To ensure high-precision measurement results when measuring high-impedance materials, be careful not to overlap the two leads, and do not touch the probe, leads and Measuring objects.
1. Impedance bridge with a range of 103 to 1012 with 1% accuracy. Relative Humidity HygrometerHigh accuracy Thermometer
2. Open the meter cover and be careful not to damage the two wires connected to the power switch on the circuit board.
3.Find three Calibration Pots at the bottom right of the circuit board
4. Make the watch at least 1/2 hour under this environmental condition, and then start the test only after self-balancing.
5. Use one end of the ACL-800 meter to connect the crocodile clip at one end and the banana plug at the other end.
6. Insert the 3.5mm long plug into the socket of the watch.
7. Connect the two ends of the resistor with alligator clips.
8. Three calibration regulators. The uppermost is the "humidity" measurement, the middle is the "impedance", and the bottom is "the temperature is adjusted with a small screwdriver." Clockwise direction is for increasing value adjustment, and counterclockwise is for decreasing value adjustment.
9. Press the power switch and compare the "temperature", "humidity" and "resistance" values at the same time.
10. Release the power switch and slowly adjust the corresponding correction regulator.
11. Press the power switch again and observe the LCD display.
12. If you need to recalibrate, you can press the power switch and adjust the corrector again.
13. Close the cover and tighten the four fixing screws.
14. Press the power switch to determine if the meter is working properly.

Product warranty commitment
Our company strictly abides by the tenet of product quality first, reputation first, customer first, and implements the following commitments on all products sold by our factory:
1. Warranty period The warranty period of the products sold by the company is one year. The quality problems caused by the product's own mechanical parts, materials and workmanship within one year from the date of sale will be replaced or repaired by the factory free of charge.
2. Service after the warranty period All products sold by the company after the warranty period are still responsible for repairing the product without labor costs to protect the interests of customers.
3. Our company provides free maintenance, testing and other services for ion fans once a quarter; if some equipment is found to have quality problems during the maintenance process, in order to ensure the normal operation of the user, our company will provide new products to replace the work area, waiting for This product will be delivered to the user after being calibrated; if it cannot be calibrated, our factory will replace the new product for free.
4. Once a technical failure occurs, the factory will solve the problem for the user's phone as soon as possible. If the phone cannot solve the problem, it will overtake the fault site within 12 hours within 300 axioms of the service point; within two hours from 300 kilometers Take the fastest way, provide new equipment within 48 hours and replace the faulty equipment with the production line.

Mode of transportation:
1. Logistics (SF, Debang, Shentong, Suer)
2. Within the Pearl River Delta, deliver more to your door
Arrival time:
1. Within the Pearl River Delta, arrive within 24 hours
2. Provinces, 2-3 working days

payment method:
1. Standard products, customers in the Pearl River Delta, cash on delivery; customers in other provinces, delivery on delivery. Special circumstances can be handled specially.
2. Custom-made products with special models, 50% deposit in advance, and cash on delivery for the rest.
Payment account:
For corporate accounts (customers who issue VAT invoices):
Company Name: Shenzhen Weihan Antistatic Technology Co., Ltd.
Tax ID: 4403 0031 9431 443
Account number: 000176947742
Bank: Gongle Sub-branch, Shenzhen Agricultural Commercial Bank

Phone: 18487903773 Email: szweihan@qq.com
Address: No. 53 Xisan Street, Fuxin District, Qiaotou Community, Houjie Town, Dongguan City, Guangdong ICP No. 15010061 [ Baidu Statistics ]
Copyright © 2003-2014 cnciu.com, All Rights Reserved BMAP GMAP

  • QQ交流
  • QQ交流
  • QQ交流
Wechat QR code
炸金花 炸金花 炸金花 炸金花